IBC SFT Superflow Condensing Tankless Water Heater
If you’d like to shower with an uninterrupted hot water supply or run hot water from multiple taps at the same time, then the SFT Superflow is the perfect solution. The SFT is the latest innovation in high efficiency tankless water heaters. A continuous supply of hot water at a constant temperature guaranteed. And no water tank in sight.
DigelAir has established itself as the trusted wholesaler for IBC boilers in Ontario, catering to the needs of contractors and businesses with their extensive range of high-quality heating solutions. With a reputation for reliability, expertise, and unparalleled customer service, DigelAir is the premier choice for those seeking wholesale water heaters in the province of Ontario.
Open an Account
Features
| A total of 4 moving parts – Unparalleled in the industry |
| New illuminated touchscreen control display panel |
| Built-in mixing valve to prevent temperature fluctuations |
| Improved hard water performance |
| Easy to install, maintain and service. Sleek wall mounted space saving design
|
RELIABLE
| Proven patented single pass labyrinth heat exchanger |
| Fully integrated copper waterway |
Innovative state-of-the-art electronic controller
|
EFFICIENT
| Fully condensing |
| Low NOX low emissions |
| Up to 5.2 GPM continuous at a 70°F rise |
| Advanced temperature control |
Technical Data
| SPECIFICATIONS |
SFT 199 |
| DHW – CSA Input (Natural Gas or Propane) – MBH |
28.5 – 199 |
| DHW – CSA Input (Natural Gas or Propane) – KW |
8.3 – 58.3 |
| U.E.F |
0.89 |
| Min Gas Pressure (Nat. Gas or Propane) – inch w.c. |
5 |
| Max Gas Pressure (Nat. Gas or Propane) – inch w.c. |
14 |
| Power (Vac/60Hz) |
120 |
| Weight (empty) – lbs/Kg |
68 /31 |
| Pressure Vessel water content – USG/Liters |
0.19 / 0.72 |
| Max Operating Pressure – Domestic Hot Water Coil – psig |
150 |
| Approved installation altitude |
10,000 ft |
| Ambient Temperature – Low (°F/°C) |
32 / 0 |
| Ambient Temperature – High (°F/°C) |
122 / 50 |
| Max relative humidity (non-condensing) |
90% |
| Min water Temperature – Domestic Hot Water (°F/°C) |
34 / 1 |
| Max water Temperature – Domestic Hot Water (°F/°C) |
149 / 65 |
| Min flow rate to activate DHW heating – USgpm |
0.5 |
| Max flow rate DHW heating – USgpm |
7 |
| Max equivalent vent length 3″ (each side) |
120’ |
| Max equivalent vent length 2″ (each side) |
35’ |
| TEMP |
RISE |
| (°F) |
GPM |
| 50 |
7.2 |
| 55 |
6.6 |
| 60 |
6 |
| 65 |
5.6 |
| 70 |
5.2 |
| 75 |
4.8 |
| 80 |
4.5 |
| 85 |
4.3 |
| 90 |
4 |
| 100 |
3.6 |
| 110 |
3.3 |
| 120 |
3 |
| 130 |
2.8 |
| 140 |
2.6 |
| VENTING |
MAXIMUM EQUIVALENT LENGTH |
| Schedule 40 PVC, CPVC or PPs |
(each side) |
| 2” |
35’ |
| 3” |
120’ |
| 2″ or 3″ 90′ Long Sweep Vent Elbow |
Allow 5 equivalent feet |
| 2″ or 3″ 90′ Short Sweep Vent Elbow |
Allow 8 equivalent feet |
| 2″ or 3″ 45′ Vent Elbow |
Allow 3 equivalent feet |
| PPs |
|
| PPs 87-90′ Elbow |
Allow 8 equivalent feet |
| Flex PPS |
|
| 3″ PPs Flex |
(Max. 35) actual feet times 1.4 |
| SURFACE |
DISTANCE FROM COMBUSTABLE SURFACES |
RECOMMENDED DISTANCE FOR INSTALLATION & SERVICE |
| Front |
2” |
24” |
| Rear |
0” |
0” |
| Left Side |
1.5” |
6” |
| Right Side |
4” |
6” |
| Top |
2” |
24” |
| Bottom |
8” |
24” |
